One customer wondered if KT200 Programmer can read/ write PSA DCM6.2A in bank? Or can only do it in OBD
Answer:
On Bench/ OBD on Bench/ Jtag BDM.
Method 1.On Bench
PIN2&3&52 – +12V
PIN4&5 – GND
PIN33 – CANL
PIN49 – CANH
Method 2.OBD on Bench
*This may only read ID but not full flash file because IMMO/ gateway not present blocks read/write instruction, so will only work in vehicle not on bench OBD
Also with VAG UDS via OBD, ECU must get immo clearance to enable write
Method 3.JTAG/ BDM
Solder 2 links on backside.
On front side solder the rainbow flat cable.
Details at https://autotool.biz/2022/12/14/can-kt200-read-psa-dcm6-2a-obd-or-boot-mode/
Hope this could help!
Whatsapp: +8615576977825 Email: sale@cnautotool.com
Comments